WATERMAID QT300 Salt Chlorinator Replacement Cell
WATERMAID QT300 Salt Chlorinator Cell
- Capacity 90,000 litres
- Operating salt level 6,000 ppm
- Compatible with the WM40 Power Supply
- Full-flow installation
- Suits 40mm (1.5") pipe work
- Electrode length = 20cm
- Casing length = 36cm (measured from thread to thread)
Please note: Cells are supplied with a grey cable, although they are not shown in the photos.
The QT300 Cell is compatible with these models of Watermaid® power supply: WM40, WM10, WN934A, WQ96A, A3, A4 and 400P.
Please check the connection type of your cell:
i) Plug/Socket Connection: (see description below), or
ii) Junction Box Connection: (see description below).
There are two connection types between the WM40 power supply and cell:
i) Plug/Socket Connection: the cell cable has a plug on the end of it, which plugs into a socket located on the underside of the power supply, or
ii) Junction Box Connection: the cell cable has three small wires, which are screwed into the brass terminals of a black junction box (using a screwdriver), located on the underside of the power supply.