WATERMAID XT300 / SC300 Salt Chlorinator Replacement Cell
WATERMAID XT300 / SC300 Salt Chlorinator Cell
- XT300 / SC300 Cell
- Capacity 90,000 litres
- Operating salt level 6,000 ppm
- Compatible with the WM40 Power supply
- Full-flow installation
- Suits 50mm (2") pipe work
- Electrode length = 20cm
- XT300 casing length = 33cm
- SC400 casing length = 36cm
- The only difference between the XT400 and SC400 models is the length of the casing, which is measured from clear thread to clear thread.
- Cells are supplied with a grey cable, although they are not shown in the photos.
The XT300 / SC300 Cell is compatible with these models of Watermaid® power supply: WM40, WM10, WN934A, WQ96A, A3, A4 and 400P.
Please check the connection type of your cell:
i) Plug/Socket Connection: (see description below), or
ii) Junction Box Connection: (see description below).
There are two connection types between the WM40 power supply and cell:
i) Plug/Socket Connection: the cell cable has a plug on the end of it, which plugs into a socket located on the underside of the power supply, or
ii) Junction Box Connection: the cell cable has three small wires, which are screwed into the brass terminals of a black junction box (using a screwdriver), located on the underside of the power supply.