AQUAELECTRA © 2019

WATERMAID XT400 / SC400 Salt Chlorinator Replacement Cell

WATERMAID XT400 / SC400 Salt Chlorinator Cell

 

  • XT400 / SC400 Cell
  • Capacity 150,000 litres
  • Operating salt level 4,000 ppm
  • Compatible with the WM40 Power supply
  • Full-flow installation
  • Suits 50mm (2") pipe work
  • Electrode length = 27cm
  • XT400 casing length = 33cm
  • SC400 casing length = 36cm

 

PLEASE NOTE:

  1. The only difference between the XT400 and SC400 models is the length of the casing, which is measured from clear thread to clear thread.
  2. Cells are supplied with a grey cable, although they are not shown in the photos.

 

The XT400 / SC400 Cell is compatible with these models of Watermaid® power supply: WM40, WM10, WN934A, WQ96A, A3, A4 and 400P.

Please check the connection type of your cell:

i) Plug/Socket Connection: (see description below), or
ii) Junction Box Connection: (see description below).

Connection Types:
There are two connection types between the WM40 power supply and cell:

i) Plug/Socket Connection: the cell cable has a plug on the end of it, which plugs into a socket located on the underside of the power supply, or

ii) Junction Box Connection: the cell cable has three small wires, which are screwed into the brass terminals of a black junction box (using a screwdriver), located on the underside of the power supply.

Connection Type
WATERMAID Cell Model